«« Back
Galvanised Steel Tote Pans and Accessories
Information
The standard, universal stacking Tote Pan, strongly constructed from galvanised steel with reinforced rims. Easy grip handles and cardholder at each end. A complete, inexpensive system widely used for the handling and storage of components.
- Resistant to heat and oil
- Capacity: 30kg safe stacking
- Will not burn or give off toxic smoke
- Class O Fire Spread Rated
Available with coloured ends for complimenting racking or coding in stores; dividers; part pans; slide-on lids and perforated bases.
Product Information & Code
Add to cart
Galvanised Steel Tote Pan TP1
Standard - 305 x 305 x 150mm
Galvanised Steel Tote Pan TP2
Standard - 455 x 305 x 150mm
Galvanised Steel Tote Pan TP3
Standard - 610 x 305 x 150mm
Galvanised Steel Tote Pan TP4
For smaller parts - 305 x 305 x 90mm
Galvanised Steel Tote Pan TP5
For smaller parts - 455 x 305 x 90mm
Galvanised Steel Tote Pan TP6
For smaller parts - 610 x 305 x 90mm
Galvanised Steel Tote Pan TP7
To fit 915mm shelving - 305 x 255 x 150mm
Galvanised Steel Tote Pan TP8
To fit 915mm shelving - 455 x 255 x 150mm
Galvanised Steel Tote Pan TP9
To fit 915mm shelving - 610 x 255 x 150mm
Galvanised Steel Tote Pan Euro Size TP10
To fit Euro size - 600 x 400 x 150mm
Embossed sides SE
Sides embossed with company name in 25mm characters. (Minimum Quantity 50) SE
Coloured end to tote pan-A CEB, CER, CEG, CEY
Available in following colours: Blue CEB, Green CEG, Red CER, Yellow CEY
Divider position slots-B DS
In any position specified - see pic B
Removable divider-B RDS
See pic B
Part pans-C PP130
Independently or with pans 130 x 130 x 100mm high
Part pans-C PP255
Independently or with pans 255 x 130 x 100mm high
Slide-on lid-D for Tote Pans TP1, TP4, TP7 - SL1
For protection of contents; for tote pan depth 305mm
Slide-on lid-D for Tote Pans TP2, TP5, TP8 - SL2
For protection of contents; for tote pan depth 455mm
Slide-on lid-D for Tote Pans TP3, TP6, TP9, TP10 - SL3
For protection of contents; for tote pan depth 610mm
Perforated base-E TP1, TP4, TP7 - PB1
12mm dia. holes on 40mm pitch; for tote pan depth 305mm
Perforated base-E for Tote Pans TP2, TP5, TP8 - PB2
12mm dia. holes on 40mm pitch; for tote pan depth 455mm
Perforated base-E for Tote Pans TP3, TP6, TP9, TP10 - PB3
12mm dia. holes on 40mm pitch; for tote pan depth 610mm
«« Back